Resource groups#

Resource groups place limits on resource usage, and can enforce queueing policies on queries that run within them, or divide their resources among sub-groups. A query belongs to a single resource group, and consumes resources from that group (and its ancestors). Except for the limit on queued queries, when a resource group runs out of a resource it does not cause running queries to fail; instead new queries become queued. A resource group may have sub-groups or may accept queries, but may not do both.

The resource groups and associated selection rules are configured by a manager, which is pluggable. Add an etc/resource-groups.properties file with the following contents to enable the built-in manager that reads a JSON config file:

resource-groups.configuration-manager=file
resource-groups.config-file=etc/resource-groups.json

Change the value of resource-groups.config-file to point to a JSON config file, which can be an absolute path, or a path relative to the Trino data directory.

Resource group properties#

name (required): name of the group. May be a template (see below).
maxQueued (required): maximum number of queued queries. Once this limit is reached new queries are rejected.
softConcurrencyLimit (optional): number of concurrently running queries after which new queries will only run if all peer resource groups below their soft limits are ineligible or if all eligible peers are above soft limits.
hardConcurrencyLimit (required): maximum number of running queries.
softMemoryLimit (required): maximum amount of distributed memory this group may use, before new queries become queued. May be specified as an absolute value (i.e. 1GB) or as a percentage (i.e. 10%) of the cluster’s memory.
softCpuLimit (optional): maximum amount of CPU time this group may use in a period (see cpuQuotaPeriod), before a penalty is applied to the maximum number of running queries. hardCpuLimit must also be specified.
hardCpuLimit (optional): maximum amount of CPU time this group may use in a period.
schedulingPolicy (optional): specifies how queued queries are selected to run, and how sub-groups become eligible to start their queries. May be one of three values:
- fair (default): queued queries are processed first-in-first-out, and sub-groups must take turns starting new queries, if they have any queued.
- weighted_fair: sub-groups are selected based on their schedulingWeight and the number of queries they are already running concurrently. The expected share of running queries for a sub-group is computed based on the weights for all currently eligible sub-groups. The sub-group with the least concurrency relative to its share is selected to start the next query.
- weighted: queued queries are selected stochastically in proportion to their priority, specified via the query_priority session property. Sub groups are selected to start new queries in proportion to their schedulingWeight.
- query_priority: all sub-groups must also be configured with query_priority. Queued queries are selected strictly according to their priority.
schedulingWeight (optional): weight of this sub-group. See above. Defaults to 1.
jmxExport (optional): If true, group statistics are exported to JMX for monitoring. Defaults to false.
subGroups (optional): list of sub-groups.

Selector rules#

user (optional): regex to match against user name.
userGroup (optional): regex to match against every user group the user belongs to.
source (optional): regex to match against source string.
queryType (optional): string to match against the type of the query submitted:
- SELECT: SELECT queries.
- EXPLAIN: EXPLAIN queries (but not EXPLAIN ANALYZE).
- DESCRIBE: DESCRIBE, DESCRIBE INPUT, DESCRIBE OUTPUT, and SHOW queries.
- INSERT: INSERT, CREATE TABLE AS, and REFRESH MATERIALIZED VIEW queries.
- UPDATE: UPDATE queries.
- DELETE: DELETE queries.
- ANALYZE: ANALYZE queries.
- DATA_DEFINITION: Queries that alter/create/drop the metadata of schemas/tables/views, and that manage prepared statements, privileges, sessions, and transactions.
clientTags (optional): list of tags. To match, every tag in this list must be in the list of client-provided tags associated with the query.
group (required): the group these queries will run in.

Selectors are processed sequentially and the first one that matches will be used.

Global properties#

cpuQuotaPeriod (optional): the period in which cpu quotas are enforced.

Providing selector properties#

The source name can be set as follows:

CLI: use the --source option.
JDBC: set the ApplicationName client info property on the Connection instance.

Client tags can be set as follows:

CLI: use the --client-tags option.
JDBC: set the ClientTags client info property on the Connection instance.

Example#

In the example configuration below, there are several resource groups, some of which are templates. Templates allow administrators to construct resource group trees dynamically. For example, in the pipeline_${USER} group, ${USER} is expanded to the name of the user that submitted the query. ${SOURCE} is also supported, which is expanded to the source that submitted the query. You may also use custom named variables in the source and user regular expressions.

There are four selectors, that define which queries run in which resource group:

The first selector matches queries from bob and places them in the admin group.
The second selector matches queries from admin user group and places them in the admin group.
The third selector matches all data definition (DDL) queries from a source name that includes pipeline and places them in the global.data_definition group. This could help reduce queue times for this class of queries, since they are expected to be fast.
The fourth selector matches queries from a source name that includes pipeline, and places them in a dynamically-created per-user pipeline group under the global.pipeline group.
The fifth selector matches queries that come from BI tools which have a source matching the regular expression jdbc#(?<toolname>.*) and have client provided tags that are a superset of hipri. These are placed in a dynamically-created sub-group under the global.adhoc group. The dynamic sub-groups are created based on the values of named variables toolname and user. The values are derived from the source regular expression and the query user respectively. Consider a query with a source jdbc#powerfulbi, user kayla, and client tags hipri and fast. This query is routed to the global.adhoc.bi-powerfulbi.kayla resource group.
The last selector is a catch-all, which places all queries that have not yet been matched into a per-user adhoc group.

Together, these selectors implement the following policy:

The user bob and any user belonging to user group admin is an admin and can run up to 50 concurrent queries. Queries will be run based on user-provided priority.

For the remaining users:

No more than 100 total queries may run concurrently.
Up to 5 concurrent DDL queries with a source pipeline can run. Queries are run in FIFO order.
Non-DDL queries will run under the global.pipeline group, with a total concurrency of 45, and a per-user concurrency of 5. Queries are run in FIFO order.
For BI tools, each tool can run up to 10 concurrent queries, and each user can run up to 3. If the total demand exceeds the limit of 10, the user with the fewest running queries gets the next concurrency slot. This policy results in fairness when under contention.
All remaining queries are placed into a per-user group under global.adhoc.other that behaves similarly.

{
  "rootGroups": [
    {
      "name": "global",
      "softMemoryLimit": "80%",
      "hardConcurrencyLimit": 100,
      "maxQueued": 1000,
      "schedulingPolicy": "weighted",
      "jmxExport": true,
      "subGroups": [
        {
          "name": "data_definition",
          "softMemoryLimit": "10%",
          "hardConcurrencyLimit": 5,
          "maxQueued": 100,
          "schedulingWeight": 1
        },
        {
          "name": "adhoc",
          "softMemoryLimit": "10%",
          "hardConcurrencyLimit": 50,
          "maxQueued": 1,
          "schedulingWeight": 10,
          "subGroups": [
            {
              "name": "other",
              "softMemoryLimit": "10%",
              "hardConcurrencyLimit": 2,
              "maxQueued": 1,
              "schedulingWeight": 10,
              "schedulingPolicy": "weighted_fair",
              "subGroups": [
                {
                  "name": "${USER}",
                  "softMemoryLimit": "10%",
                  "hardConcurrencyLimit": 1,
                  "maxQueued": 100
                }
              ]
            },
            {
              "name": "bi-${toolname}",
              "softMemoryLimit": "10%",
              "hardConcurrencyLimit": 10,
              "maxQueued": 100,
              "schedulingWeight": 10,
              "schedulingPolicy": "weighted_fair",
              "subGroups": [
                {
                  "name": "${USER}",
                  "softMemoryLimit": "10%",
                  "hardConcurrencyLimit": 3,
                  "maxQueued": 10
                }
              ]
            }
          ]
        },
        {
          "name": "pipeline",
          "softMemoryLimit": "80%",
          "hardConcurrencyLimit": 45,
          "maxQueued": 100,
          "schedulingWeight": 1,
          "jmxExport": true,
          "subGroups": [
            {
              "name": "pipeline_${USER}",
              "softMemoryLimit": "50%",
              "hardConcurrencyLimit": 5,
              "maxQueued": 100
            }
          ]
        }
      ]
    },
    {
      "name": "admin",
      "softMemoryLimit": "100%",
      "hardConcurrencyLimit": 50,
      "maxQueued": 100,
      "schedulingPolicy": "query_priority",
      "jmxExport": true
    }
  ],
  "selectors": [
    {
      "user": "bob",
      "group": "admin"
    },
    {
      "userGroup": "admin",
      "group": "admin"
    },
    {
      "source": ".*pipeline.*",
      "queryType": "DATA_DEFINITION",
      "group": "global.data_definition"
    },
    {
      "source": ".*pipeline.*",
      "group": "global.pipeline.pipeline_${USER}"
    },
    {
      "source": "jdbc#(?<toolname>.*)",
      "clientTags": ["hipri"],
      "group": "global.adhoc.bi-${toolname}.${USER}"
    },
    {
      "group": "global.adhoc.other.${USER}"
    }
  ],
  "cpuQuotaPeriod": "1h"
}